STRIPES

Stripes can be produced in a continuous repeated pattern on roll materials, leather and pre-cut items.
We can also produce bespoke patterns upon request.
Roll materials: Processed by running meter, Max width 160cm.
Full Roll to roll continuous processing
Leather:
Processed by half hides or pre-cut panels up to max 160cm wide
Pre-cut items:
All Pre-cut items must allow for 1 extra complete stripe at the top and bottom edges of the cut panel. An allowance of 25mm on the side edges must be added for correct alignment of finished products. Centre of top and bottom to be marked on each item.

Bespoke Stripe patterns available on request.


Stacks Image 1673
Take a closer look at each pattern type and even download the pattern image if you wish. Scroll to bottom for our Pattern Card, which is also downloadable.
Stacks Image 1723

Click images to zoom

Pint Stripe Perforation Pattern 1
Stacks Image 1743

Click image
to view wider pattern area

Stacks Image 1725

Click images to zoom

Pint Stripe Perforation Pattern 2
Stacks Image 1737

Click image
to view wider pattern area

Stacks Image 1719

Click images to zoom

Pint Stripe Perforation Pattern 3
Stacks Image 1745

Click image
to view wider pattern area

Stacks Image 1717

Click images to zoom

Pint Stripe Perforation Pattern 4
Stacks Image 1747

Click image
to view wider pattern area

Stripe Dimensions listed are taken from centre to centre of Perforation holes.

Stacks Image 1384
Stacks Image 1386
Download our Pattern Card
Click the thumbnail images to download our Pattern Card to keep as a handy reminder.
November 2020 version.

Disclaimer: Perforation patterns are intended for design aesthetics only. It is the end manufacturers responsibility to make sure that any items made using perforation patterns do not infringe the copyright or patents of other manufacturers.

Tel: 01202 744366 or Email: enquiries@ukperforation.co.uk